You are here:
  1. Home
  2. Product
  3. EMERSON
  4. 5X00875G01 OCR1100 model

5X00875G01 OCR1100 model

➤The 5X00875G01 is a high-performance Controller/Processor Module (commonly referred to as the OCR3000 Controller) within the Emerson Ovation™ Distributed Control System (DCS). It serves as the advanced successor to the previous OCR1100 model.

➤ Stock: 1-3pcs (IN STOCK)

➤ Shelf life: 12 months

➤ Product Status: Original Genuine

➤ supply: From HONG KONG SAUL ELECTRICAL LIMITED

➤ Email: 3007273136@qq.com

Categories:
Tags: ,

5X00875G01 OCR1100 model

1. Core Processor & Memory Architecture

Parameter Technical Specification
Processor Architecture Brand new SoC-based multi-processor system architecture (Zynq UltraScale+ MPSoC)
CPU Core Quad-core ARM® Cortex™ A53 64-bit processor
Clock Speed 1200 MHz (1.2 GHz)
Memory (DDR) 1 GByte LPDDR4 SDRAM (with ECC error correction)
System Boot Flash 32 MByte QSPI Flash (expandable up to 128 MByte)
Onboard Solid-State Storage Up to 1 GByte industrial-grade high-speed USB Flash (with wear leveling & ECC)

2. Control & I/O Processing Capability

  • Control Loop Cycle (Loop Speed): Supports up to 5 independent control tasks running concurrently, with control cycles configurable from 10 milliseconds to 300 seconds.

  • Maximum Point Capacity: A single controller can manage and generate up to 64,000 originated system points.

  • I/O Branch Parallel Scanning: The hardware interface directly supports parallel scanning of 16 local I/O branches, replacing traditional serial loop reading and vastly increasing data throughput efficiency.

  • Backward Compatibility: Fully backward compatible with legacy OCR1100 controller programs at the application software level.

3. Communication & Network Interfaces

  • Backplane Communication: Integrated 100Mbps high-speed controller backplane communication bus used for real-time data mirroring between the primary and backup controllers.

  • Ethernet Ports: 4 Ethernet ports provided via the base/backplane.

    • Configurable as 4 UTP copper ports OR 2 SFP fiber ports + 2 UTP copper ports.

    • Supports 10/100/1000 Mbps auto-negotiation.

  • Debug/Maintenance Port: Integrated FTDI FT232 USB-UART Console port.

  • Protocol Integration: Seamlessly interfaces with various third-party smart field devices and PLCs via embedded communication drivers.

4. Electrical, Physical & Environmental Specifications

  • Operating Input Power: Rated 24VDC (supports dual-channel redundant power inputs).

  • Power Consumption: Approx. 8 ~ 15 W (low-power, fanless design).

  • Operating Ambient Temperature: 0°C to +60°C (32°F to 140°F).

  • Operating Ambient Humidity: 0% to 95% RH (non-condensing).

  • Storage Temperature: -40°C to +85°C.

  • Corrosion Resistance: G3 conformal coating (optional, for harsh industrial sites with corrosive gases like hydrogen sulfide).

5. Redundancy & Security Design

  • Redundant Switchover: Supports 1:1 hot-standby controller redundancy. The bumpless failover time between primary and backup modules is ≤ 5ms.

  • Firmware Security: All controller firmware files are cryptographically signed to prevent malicious code injection, meeting stringent industrial cybersecurity standards.

  • Diagnostics: Built-in hardware-level advanced online self-diagnostics and fault warning indicators.

Contact us here: